主要使用建筑物内各种导电,抗静电弹性地板(PVC)卷材、片材地板与基础物粘接。
It is mainly used in the buildings for electric conductivity,anti-electrostatic bonding for plastic sheet and tile to substrate Special for heavy-duty floor.
施工方法 Application Instruction
1、确认待涂胶地坪必须清洁、干燥、光滑、平整,水泥地面不起沙。
Confirm that the floor surface to be bonded must be clean, dry, smooth, and level,with cement floors being free of dusting.
2、使用前应搅拌均匀,建议用 A2 或 A3 锯齿刮刀均匀地涂刮,随后晾放时间 20-40分钟(根据气候温度不同,可用手指触摸判断表干情况)即可铺设上述地板材料。
Stir thoroughly the product before use. Apply it evenly on the surface of substrate by using A2 or A3 toothed trowel. After open time of 20-40min, the substrate is ready to accept above flooring material.
3、铺下地板后用压板辊,后用 50kg以上滚筒滚压以排除残余的空气,确保胶水全部转移到地板背面。
After the flooring material is applied on the substrate rub the surface by wood plate and roll by 50kg roller to remove entranced air under the flooring. Make sure that adhesive has transferred to the back of the flooring material.
理论涂布量 Theoretical application rate
A2齿刮板 A2 Tooth trowel: 330g/m²
A3齿刮板 A3 Tooth trowel: 380g/m²
保质期 Quality Grarantee Period
在0-40℃库房内储存，保质期为12个月。
12 months if stored in 0-40℃.
注意事项 Notes
本品在运输，储存和施工过程中防止严寒及阳光暴晒，施工温度不低于5℃。
The product should be protected against frost and direct light during transportation, storage and application. Application temperature should not be lower than 5℃.