NO430是一款单组份非吸收性界面剂,该产品采用特殊工艺配方,具有良好的粘结性能,有效增强自流平水泥和非吸收性基层的结合力。是一种专门应用于非吸收性基层处理的理想解决方案。
NQ430 is a component non-absorbable waterbome surface agent. This product is mainly suitable fornon-absorbable foor. lt has good bonding perfomance and effectively enhances the bonding strength ofself-leveling cement and non-absorbable loor. lt is an ideal solution for non-absorbable ground treatment.
施工方法
基层处理：基层必须清洁、干燥、无裂缝、无油渍。使用前用地表打磨机对基层进行打磨处理，彻底清洁基层。
本品可兑水，兑水比例根据基层情况而定。
稀释后可用羊毛滚筒滚涂，要求均匀。
风干时间30-60分钟。
Application Instruction
The surface should be clean, dry, and strong without coosepart loose layer should be completely removed by granulator, and the substrate should be cleaned thoroughly.
The product can be diluted with water. The water proportion base on the substrate situation.
Apply the primer evenly to fully cover the surface using a fine-pored foam roller.
Drying times is about 30-60 mins(surface dry).
理论涂布量 Theoretical application rate
每公斤涂刷12-15平方左右
About 12-15㎡/kg
保质期 Quality Grarantee Period
在1-40℃库房内储存，保质期为12个月。
12 months if stored in 1-40℃.
注意事项 Notes
本品在运输，储存和施工过程中防止严寒及阳光暴晒，施工温度不低于5℃。
The product should be protected against frost and direct light during transportation, storage and application.Application temperature should not be lower than 5℃.