主要使用建筑物内各种导电,抗静电弹性地板(PVC,橡胶)卷材,片材地板与基础物粘接。
It can be used in the buildings for electric conductivity,anti-electrostatic bonding for plastic or Rubber sheet and tileto substrate Special for heavy-duty floor.
施工方法
使用前应搅拌均匀
建议用专用K齿刮刀均匀地涂刮。
铺展后凉胶时间20-50分钟即可铺设地面材料，并用压碾压。
Application Instruction
Stir thoroughly the product before use.
Apply it evenly on the surface of substrate by using K toothed trowel.
After open time 20-50min, the substrate is ready to accept above flooring material. Rub the surface by wood plate and roll by roller.
理论涂布量 Theoretical application rate
K齿刮板 :250g/㎡
保质期 Quality Grarantee Period
在0-40℃库房内储存，保质期为12个月。
12 months if stored in 0-40℃.
注意事项 Notes
本品在运输，储存和施工过程中防止严寒及阳光暴晒，施工温度不低于5℃。
The product should be protected against frost and direct light during transportation, storage and application.Application temperature should not be lower than 5℃.