本产品采用高品质特殊结构高分子共聚物乳液及添加剂等原料，是一种水溶性界面剂，无毒、无害的环保友好型产品。
The product is made of high quality special structural polymer emulsion and additives. It is a water-soluble interface agent, non-toxic, harmless and environment- friendly products.
施工方法
基层处理：基层必须清洁、干燥、无裂缝、无油渍。使用前用地表打磨机对基层进行打磨处理，彻底清洁基层。
本品可兑水，兑水比例根据基层情况而定。
稀释后可用羊毛滚筒滚涂，要求均匀。
风干时间1-3小时。
Application Instruction
The surface should be clean, dry, and strong without coosepart loose layer should be completely removed by granulator, and the substrate should be cleaned thoroughly.
The product can be diluted with water. The water proportion base on the substrate situation.
Apply the primer evenly to fully cover the surface using a fine-pored foam roller.
Drying times is about 1-3 hours(surface dry).
理论涂布量 Theoretical application rate
每公斤涂刷8平方左右
About 8㎡/kg
保质期 Quality Grarantee Period
在1-40℃库房内储存，保质期为12个月。
12 months if stored in 1-40℃.
注意事项 Notes
本品在运输，储存和施工过程中防止严寒及阳光暴晒，施工温度不低于5℃。
The product should be protected against frost and direct light during transportation, storage and application.Application temperature should not be lower than 5℃.