本品采用高品质优质丙烯酸脂合成树脂及优质填充剂等原料,应用先进技术和配方精制而成,是一种性能优异的水溶性塑料地板胶，无毒无害，为绿色环保产品。
The product is produced by advanced technology and uisng imported acrylate polymers and high quanlity pigment and filler. It is non-toxic and not harmful, belongs to green environment-friendly product.
应用范围
主要适用于室内各种LVT地板与吸收性基层的粘结。
Scope of Application
Mainly suitable for bonding various LVT fooring and absorbent substrates indoors.
施工方法
使用前应搅拌均匀，建议用A2或A3锯齿刮刀均匀地涂刮，铺展后凉胶时间20-40分钟(根据气候温度不同，可用手指触摸判断表干情况)即可铺设上述地板材料。
铺下地板后先用软木板，后用50kg以上滚筒滚压以排除残余的空气，确保胶水全部粘结附到地板背面。
24小时后可固化,48小时后可步行。
Application Instruction
Stir thoroughly the product before use,apply it evenly on the surface of substrate by using A2 or A3 toothed trowel. After short open time of 20-40 mins, the substrate is ready to accept above flooring material.
After the flooring material is applied on the substrate rub the surface by wood plate and roll by 50kg roller to remove entranced air under the flooring mate-rial. Make sure that adhesive has transferred to the back of the flooring material.
The adhesive will be dried after 24hrs, and set to foot traffic after 48hrs.
理论涂布量 Theoretical application rate
A2齿刮板 :300-350g/㎡
A3齿刮板 :250-300g/㎡
保质期 Quality Grarantee Period
在0-40℃库房内储存，保质期为12个月。
12 months if stored in 0-40℃.
注意事项 Notes
本品在运输，储存和施工过程中防止严寒及阳光暴晒，施工温度不低于5℃。
The product should be protected against frost and direct light during transportation, storage and application.Application temperature should not be lower than 5℃.